Roofing Contractor
Pennsylvania
When your Scranton roof shows signs of wear, don't wait. Our certified PA roofers in Scranton provide free estimates and finish jobs in under 48 hours.
Several roofing estimates requested this week in Scranton
Complete tear-off and replacement of your Scranton home's roofing system. Our licensed contractors install manufacturer-certified shingles with full underlayment, flashing and ridge cap. Most jobs completed in 1-2 days.
Seamless aluminum and copper gutters installed and repaired by our Scranton contractors. Proper sizing, downspout placement and gutter guards to protect your roofing investment.
From missing shingles to flashing leaks and soffit damage, our Scranton roofers diagnose and fix problems fast. Emergency tarping available same-day for active leaks.
Proper attic ventilation and insulation protect your Scranton roof from premature failure. Our contractors assess and correct ridge vents, soffits and attic insulation levels.
Hail and wind storm damage assessment by licensed Scranton roofers. Detailed documentation for insurance claims, emergency tarping and priority scheduling for storm-damaged homes.
Professional roof inspection by licensed Scranton contractors — pre-purchase inspections, annual maintenance checks, warranty inspections. Written report with photos included.
TPO, EPDM and modified bitumen flat roof systems installed by certified Scranton contractors. Seamless membranes, proper drainage slope and manufacturer warranties.
Standing seam and corrugated metal roofing systems installed by certified contractors in Scranton, PA. Lifespan 40-70 years, energy-efficient, low maintenance.
Scranton Housing Data — ACS 2024
Older housing stock
87%
of homes pre-1980
Homeowners
15,069
owner-occupied units
Ownership rate
50%
of households own their home
Single-family homes
48%
of housing units
Median household income
$48,776
annual (ACS estimate)
With 87% of Scranton's housing stock built before 1980, aging infrastructure is one of the leading drivers of roofing contractor calls in Lackawanna. Older systems deteriorate faster, increasing risk and repair costs for homeowners.
COST RANGE
Estimates based on roof size, pitch, material and tear-off requirements
Insurance tip: Most homeowner policies cover sudden damage. Ask your contractor about documentation to maximize your claim.
* Estimates for Scranton, Pennsylvania. Final pricing after on-site assessment.
Roofing costs in Scranton reflect the specifics of the city’s old housing stock, changing weather, and the high percentage of early-1900s wood-frame homes. With 87.2% of houses here built before 1980 and a homeownership rate just over 50% (U.S. Census Bureau, ACS 2024), most neighborhoods are filled with duplexes and row homes stacked close together. These types of structures, especially common in Scranton and Old Forge, drive up the need for decking repairs and uncover plenty of surprise carpentry as older plank boards are exposed during tear-off.
This locally dense and aging housing means roof replacements often become more involved here than in newer suburbs. Many roofs have steeper pitches and multiple layers of shingles going back decades, thanks to a pattern of covering instead of stripping—until city-permitted full tear-offs are now required. Most Scranton projects also need repairs to rotted deck boards and new ice barriers, adding cost but protecting against the region’s heavy snow and ice-dam conditions. This all puts the lower end of replacement prices firmly above what some might expect: homeowners regularly face project totals that land in the middle of the bands below, with few truly “easy” jobs left in the city’s core.
| Material / Scope | Lifespan | Best for | Price range (installed) |
|---|---|---|---|
| Asphalt shingles — architectural (30-yr) | 25–30 yrs | Most Scranton and Dunmore homes needing affordable replacement | $8,400–$18,000 |
| Asphalt shingles — impact-resistant (Class 4) | 30+ yrs | Exposed hilltop homes in Scranton, Archbald, or South Abington | $14,000–$18,000 |
| Metal standing seam | 40–70 yrs | Long-term owners or homes with frequent ice-dam damage | $20,500–$36,500 |
| Flat roof — TPO or EPDM | 15–25 yrs | Multi-family or mixed-use row buildings with low-slope roofs | $10,500–$21,500 |
| Roof repair — leak or isolated section | n/a | Minor leaks or missing shingle repairs, not full replacement | $450–$1,700 |
Prices are estimates for a typical Scranton home and vary with roof size, pitch, decking condition and material selection.
Scranton’s roofing season usually opens in late March and can run through early November, but conditions on the ground—not the calendar—dictate when real work can happen. Asphalt shingles, the most common material here, need consistent daily highs in the upper 40s to seal properly. Early spring installs can be risky, as some valleys and north slopes stay icy through April, meaning shingle adhesion and slip hazards are a real factor for crews.
Summer is the peak booking window for Scranton roofing contractors. The market here is crowded with small outfits all chasing jobs, and even with that saturation, crews book up fast from June through August. If you need a roof done before school starts, aim to book by May. By September, the backlog usually eases, and rates occasionally edge down a bit. Labor remains tight through late fall—especially in October, when homeowners suddenly discover leaks as the rain returns and oak leaves gather in gutters. If you have an emergency, such as a ridge vent torn off by wind in February, be prepared for a premium price and slower response. Cold-weather work may even require temporary tarping until a safe full replacement is possible.
Thanks to Scranton’s high contractor density, you’ll usually get a faster site visit than in rural Pennsylvania—but long-standing crews with real experience are rarely available for next-day tear-offs except for true emergencies, and their calendars fill quickly after July.
Roofing material choice in Scranton comes down to how well it stands up to heavy snow (40 psf design load) and cold snaps down to 4 °F. Asphalt shingles are everywhere for good reason: they’re budget-friendly and robust enough to last 25–30 years if properly installed on a solid deck. Most local homes are steep-roofed, letting snow slide to the gutters, which suits shingles. Upgrading to Class 4 impact-resistant asphalt makes sense for houses on exposed hills, like parts of Archbald and the east side of Scranton, where wind-driven ice and tree limbs do real damage—but the jump in cost is only worth it for owners intending to stay long-term.
Metal standing seam roofs outperform in snow and ice-dam-prone areas: snow slides off quickly, and they don’t absorb water from melting and refreezing cycles. This material is a real investment—two to three times the outlay of shingles—but for homes that have chronic ice-backup issues, it pays for itself in avoided repairs. Flat TPO or EPDM membrane is the go-to for row houses and older duplexes with low slopes. Membrane roofs are vulnerable to punctures from foot traffic or debris, so they’re mostly chosen where the structure demands low slope, not by preference.
Asphalt remains dominant on Scranton and Dunmore homes not only because of cost, but because old wooden framing and steep pitches make layering shingles practical and attractive for neighborhood look. Metal is best reserved for severe ice-dam addresses or forever-homes; for the average homeowner, especially in Scranton's core, architectural shingles are the logical call.
| Material | Installed cost | Lifespan | Cold-climate performance | Maintenance |
|---|---|---|---|---|
| Asphalt architectural | $8,400–$18,000 | 25–30 yrs | Good with proper ice barrier | Check for ice dams and clear gutters |
| Asphalt Class 4 impact-resistant | $14,000–$18,000 | 30+ yrs | Better in hail, wind, and on exposed ridges | Minimal, same as standard shingle |
| Metal standing seam | $20,500–$36,500 | 40–70 yrs | Excellent for snow and ice, best leaks resistance | Clear snow drifts at eaves, inspect fasteners |
| TPO / EPDM membrane | $10,500–$21,500 | 15–25 yrs | Handles Ponding if well-installed, but more vulnerable to sharp ice | Annual seam check, patching as needed |
Scranton’s core housing stock—and a good deal of Old Forge’s—is made up of homes built before 1980, with the overwhelming majority going up before the late 1940s. With 87.2% of residences built before 1980 (U.S. Census Bureau, ACS 2024), this means most roofs you see are pitching steeply, with planked rather than plywood or OSB decking underneath. Back then, roofs were covered in either cedar shingles or the earliest generations of three-tab asphalt—then covered right over, layer after layer, across decades.
Most of these older homes never saw eave ice barrier until very recently, since that was not required by code. Strip a roof in central Scranton today, and you’ll likely find a hodgepodge of old deck boards, plenty of voids to patch, old nail holes, and often enough, two full layers of shingle to remove. Deck replacement is common, and adding today’s code-mandated ice and water shield at eaves is standard because ice damming from snow melt is a given in this climate. If you’re buying or renovating a Scranton house built before the ‘80s, expect to budget for carpentry and insulation corrections as part of your roof project, not just shingles.
For the minority of newer single-families you’ll find in South Abington or on the edge of the county, first roof replacement tends to be driven by shingle wear and attic ventilation, not by severe hidden rot. But for most Scranton homes, every roof is at least part restoration job.
Price swings on Scranton roof quotes usually come down to the reality of old construction, not tweaks in the estimator’s math. The most obvious lever is size—roof area in “squares” (100 sq ft each) sets your baseline on labor and materials. Steep-pitched, two-family dwellings are standard here, often meaning more vertical than horizontal travel for the crew, which adds to install time and cost through harness setups and slower shingle placement.
Decking surprises are historically common in Scranton due to aged plank boards covered over many times. During every full replacement, we end up changing at least a few sheets, typically at $75–$150 apiece. Two or more layers of old shingle must come off by code if you want to pass local inspection, which doesn’t just add landfill costs ($500–$1,500 per extra layer), but means more haul-off and labor hours as well. Add in the mandatory ice barrier at the eaves for any roof with a history of winter leaks—an upgrade you can't skip in neighborhoods that routinely see ice damming for weeks—and that’s another $300–$800 on most jobs.
Material selection accounts for some spread: picking impact-resistant shingle adds around $500–$2,500, but pays for exposed ridgeline homes that see more wind and frozen branches. What really sets Scranton apart from rural areas is the way contractor competition can either raise or drop your quote, depending on how tight the schedule is after a big storm, and who’s available to do the work to code.
| Factor | Why it matters here | Cost impact |
|---|---|---|
| Roof size in squares | Each square is 100 sq ft of roof surface | Primary multiplier |
| Pitch and access | Steep pitches need harnesses and slow the crew | +20–30% labour |
| Existing layers to tear off | Two or more layers means full tear-off and disposal | $500–$1,500 per layer |
| Decking condition | Rot is found during tear-off, not before | $75–$150 per sheet |
| Ice barrier at eaves | Required where ice damming has a history | $300–$800 |
| Material grade | 3-tab vs architectural vs Class 4 impact-resistant | $500–$2,500 |
In Scranton, roofing jobs that involve a tear-off and full roof replacement on any one- to four-family residence typically require a building permit. The authority responsible for code enforcement is the City of Scranton Department of Licensing, Inspections & Permits. They administer the Pennsylvania Uniform Construction Code (UCC), which follows the International Residential Code—but with direct enforcement at the city level rather than by the state.
For minor like-for-like shingle repairs covering only a small area, no permit is usually required in Scranton and Dunmore—that work is routinely performed with no official paperwork. But if your contractor is replacing a full roof, changing the deck or underlying structure, a permit must be secured before any dumpsters hit the driveway or the first shingle is pulled off.
For legal compliance, any job over $500 must use a contractor registered as a Home Improvement Contractor (HIC) with the Pennsylvania Office of Attorney General. As a homeowner, you can verify HIC registration directly at hic.attorneygeneral.gov. Workers’ compensation coverage for all employed roofers is required by state law, and you can check proof through the state’s WCAIS portal (wcais.pa.gov). Always insist on seeing both HIC registration and workers’ comp insurance before signing a contract, or you risk liability, project shutdowns, and, at worst, denied claims.
A clear, detailed roofing estimate helps you compare bids and avoid surprise upcharges. Every Scranton estimate should state roof area in squares (with pitch specified—don’t accept one listed just as “20 squares” with nothing else) and list each item as a separate line: tear-off and dumpster, product and underlayment brand, how much ice shield, and what the contingency pricing is if deck sheets are rotten. Flashing and vent boots, essential on nearly every home in town, should be called out separately by type or area covered.
Your estimate should show both the manufacturer’s warranty (usually on the shingles or membrane itself) and the contractor’s labor warranty—these are not the same, and separation is your protection if workmanship is ever in question. Payment terms should be clear: an honest local contractor will ask for a modest deposit (under 15%, enough for materials) and the rest on completion. Any bid with a large upfront cash demand or only a lump sum (with no breakdown) should be questioned seriously or set aside entirely. Scranton’s housing complexity means surprises happen, but the cost to replace rot should always be stated “per sheet” before you sign.
| Line item | What to look for | Red flag if… |
|---|---|---|
| Roof area | Stated in squares, with pitch | No measurement given |
| Tear-off and disposal | Number of layers, dumpster included | Bundled into one figure |
| Underlayment | Product type and coverage | Listed only as 'felt' |
| Ice and water shield | Coverage height at eaves | Omitted entirely |
| Decking | Per-sheet contingency price | No allowance at all |
| Warranty | Workmanship years stated separately | Only the shingle warranty |
| Payment | Deposit under 15%, balance on completion | Large upfront cash |
En savoir plus sur Scranton